100A 2 Pole IP65 GRP Enclosed 2 Position and Off Manual Changeover Switch
- Proteus Range of Changeover switches are available in Steel enclosures to IP3X or GRP to IP65
- The Amperge ratings go from 20A up to 800A in steel
- The Amperge ratings from 20A to 100A in GRP
- Manufactured to BSEN 60947 1 & 3
Datasheet Download
- Additional information
Additional information
| Height | 240 mm |
|---|---|
| Width | 160 mm |
| Depth | 194 mm Depth Over Handle |
| Rated Insulation Voltage | 690V |
| Weight | 1.47 Kg |
| Terminal Cable Capacity | 35 mm2 |
| Torque | 3Nm |
| Ambient Temperature | -5 to +40 C |
| Mounting | Wall Mounted |
| Guarantee | 12 Months |
| Frequency | 50 Hz |
| Cable Entry | 2 x M20. 1 in top & 1 in bottom, 6 x M25/32. 2 in top & 2 in bottom & 2 in rear |
| Current Rating | 100A |
| Rated Operated Voltage | 230/400V ac. |
| Packaging Types | Each |
| Product Range | Manual Changeover Switch |
| Standards | BS EN 60947-3 |
| Protection Class IP Rating | IP65 |
| Enclosure | Polycarbonate |
| Compliance | Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Purpose | Selection of one of two supplies to feed a common load. Selection of one of two loads fed from a common supply. |
| Pollution Degree | 3 |
| Maximum Altitude | 2000m |
