100A Triple Pole and Neutral IP65 Steel Switch Disconnector Fuses complete with Fuses fitted
- This range of wall mounting switch disconnector fuses are rated from 63A to 200A Three Pole and Neutral, Four pole configuration available upon request; Switch mechanism rated at 65kA when fitted with appropriate BS88 fuses, Fully rated BS88 fuses fitted; Designed to meet the requirements of industrial and commercial installations; Heavy duty interlocking handle, Padlockable in off position for security; Screened cable terminations; Robust, heavy duty steel enclosure; Folded and welded steel construction for extra rigidity; Manufactured to BSEN60947 parts 1 & 3;
- Additional information
Additional information
| Height | 500 mm |
|---|---|
| Width | 400 mm |
| Depth | 200 mm + 70 mm |
| Short Circuit Rating | 65kA |
| Torque | 20Nm |
| Ambient Temperature | -5 to +40 C |
| Number of Poles | Triple Pole And Neutral |
| Mounting | Wall Mounted |
| Guarantee | 12 Months |
| Frequency | 50 Hz |
| Current Rating | 100A |
| Rated Operated Voltage | 230/400V ac. |
| Incoming Terminal Capacity | M8 Bolts 70mm Square Cable (When using 70mm cable it is recommended that the UCB1 is fitted) |
| Packaging Types | Each |
| Standards | BS EN 60947-3 |
| Protection Class IP Rating | IP65 |
| Enclosure | Cold rolled steel with an epoxy paint finish to RAL7035w |
| Door Covers | Side hinged overall interlocked door complete with plastic turn catch. |
| Material | Cold rolled steel with an epoxy paint finish to RAL7035w |
| Compliance | Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Use | A range of switch disconnector fuses and switch disconnectors which are rated for on-load switching and provide isolation of the switched circuit. |
| Product Range | Switch Disconnector Fuse – IP65 steel |
