200A Four Pole Incoming Kit XL Split Meter Boards
- Each individual XL distribution board unit with meter fitted must not exceed 100A full load current per phase; Select isolator incoming kit to satisfy the total load current demand;
- Additional information
Additional information
| Height | 400 mm |
|---|---|
| Width | 600 mm |
| Depth | 132 mm |
| Short Circuit Rating | 10kA Icc. |
| Torque | Isolator M8 Bolt 20Nm max, M10 Bolt 20Nm max. |
| Ambient Temperature | -5 to +40 C |
| Number of Poles | Triple Pole And Neutral |
| Mounting | Wall Mounted |
| Guarantee | 12 Months |
| Frequency | 50 Hz |
| Cable Entry | Bottom Glandplates Removable For Ease Of Cutting. Bottom Glandplate Also With Variable Knockout 25mm and 33mm |
| Current Rating | 200A |
| Rated Operated Voltage | 230/400V ac. |
| Incoming Terminal Capacity | M8 Bolts 95mm Square Cable and Earth M10 Bolt |
| Packaging Types | Each |
| Standards | BS EN 61439 pt 1&2 |
| Protection Class IP Rating | IP3X |
| Enclosure | 1.2mm Cold rolled steel with an epoxy paint finish to RAL7035 matt grey. |
| Door Covers | Screw fixed cover. |
| Switchgear Fitted | Four Pole Switch Disconnector Incomer 200A |
| Compliance | Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Use | 200A incoming section for XL split load, metered MCB boards. |
| Product Range | XL Range |
