250A Triple Pole and Neutral Metalclad Switch Disconnector
- This range of wall mounting switch disconnectors are rated from 63A to 630A Three Pole and Neutral, Four pole configuration available upon request
- Switch mechanism rated at 65kA when backed up by appropriate BS88 fuses
- Designed to meet the requirements of industrial and commercial installations
- Heavy duty interlocking handle, Padlockable in off position for security
- Screened cable terminations
- Epoxy powder coat finish
- Robust, heavy duty steel enclosure
- Folded steel construction for extra rigidity
- Flush fitting door, removable for ease of installation
- Built-in cable box suitable for most applications
- Manufactured to BSEN60947 parts 1 & 3
- Additional information
- Datasheet
Additional information
| Height | 700 mm |
|---|---|
| Width | 400 mm |
| Depth | 255 mm |
| Weight | 18.7 Kg |
| Short Circuit Rating | 65kA When backed up by 250A BS88 fuse |
| Torque | 40Nm |
| Ambient Temperature | -5 to +40 C |
| Number of Poles | Triple Pole And Neutral |
| Mounting | Wall Mounted |
| Guarantee | 12 Months |
| Frequency | 50 Hz |
| Cable Entry | Top And Bottom Glandplates Removable For Ease Of Cutting |
| Current Rating | 250A |
| Rated Operated Voltage | 230/400V ac. |
| Incoming Terminal Capacity | M10 Bolts 185mm Square Cable (When using 185mm cable it is recommended that the UCB2 is fitted) |
| Packaging Types | Each |
| Standards | BS EN 60947-3 |
| Protection Class IP Rating | IP3X |
| Lockable | Yes |
| Enclosure | 1.2mm Cold rolled steel with an epoxy paint finish to RAL7035 matt grey. |
| Door Covers | Screw fixed hinged interlocked door. |
| Compliance | Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Use | A range of switch disconnector fuses and switch disconnectors which are rated for on-load switching and provide isolation of the switched circuit. |
| Product Range | Switch Disconnector |
