40A EV Metalclad Distribution Boards with PME Fault Detection 16kA
- No earth rods required
- BS 61439-3 Compliant for direct connection to meter tails
- PME fault detection of over/under voltage to reg. 722.411.4.1 (iv) of BS 7671
- Automatic disconnection of phase, neutral and earth
- Complete with Low Noise 40 A 4P Contactor which offers zero-hum
- DP Type A RCBO as standard
- Pre-wired in non-combustible metal enclosures
- Additional information
Additional information
| Height | 225 mm |
|---|---|
| Width | 225 mm |
| Depth | 119 mm |
| Short Circuit Rating | 16kA |
| Terminal Cable Capacity | 50 mm2 |
| Torque | 2-2.5 Nm. |
| Mounting | Surface |
| Guarantee | 1 Year |
| Frequency | 50 Hz |
| Busbar Rating | 100A |
| Cable Entry | Selection of Knockouts / Cutouts |
| Current Rating | 63A |
| Cable Clamp | Cage Clamp |
| Rated Operated Voltage | 230V ac. |
| Incoming Terminal Capacity | 50 mm2 |
| Terminal Type | Cage Clamp |
| Number of Outgoing Ways | 1 |
| Packaging Types | Each |
| Product Range | EV Consumer Units |
| Standards | BS EN 61439-3 |
| Protection Class IP Rating | IP4Xc |
| Lockable | Available On Request |
| Enclosure | colour RAL7035, Steel |
| Door Covers | Steel cover c/w letterbox lid |
| Switchgear Fitted | 63A DP Isolator feeding 40A DP RCBO Type A & 40A 4 Pole N/O Contactor |
| Material | Steel |
| Finish | Powder Coated RAL 9010 Matt |
| EV Charger Circuits | 1 |
| kW Rating | 7.2 kW |
| Compliance | Electromagnetic Compatibility Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Purpose | EV install protecting against overcurrent and short circuit and earth leakage. |
