50kA 4 Module 3 Pole and Neutral Type 1+2 Surge Protector with Steel Enclosure
- Combined Type 1+2 Surge Protection Device (SPD) mounted in an IP3X steel enclosure
- Plug in modules
- Key coded modules to prevent wrong insertion
- Reversible modules to allow top or bottom cabled terminals
- Visual status indication
- Suitable for TNC-s/TN-s or TT systems
- Maximum discharge current Imax – 50kA 8/20 µs
- Nominal discharge current In – 20kA 8/20 µs
- Mains back up protection – 250A
- Additional information
Additional information
| Height | 385 mm |
|---|---|
| Width | 205 mm |
| Depth | 116 mm |
| Short Circuit Rating | 50kA |
| Terminal Cable Capacity | 25 mm2 In / 25 mm2 Out |
| Mounting | Surface |
| Guarantee | 12 Months |
| Frequency | 50 Hz |
| Rated Operated Voltage | 230/400V ac. |
| Incoming Terminal Capacity | 25 mm² |
| Number of Modules | 4 |
| Packaging Types | Each |
| Product Range | Surge Protection Devices |
| Standards | BS EN 61439 pt 1&2, BS EN 61643 pt1 |
| Protection Class IP Rating | IP3X |
| Surge Protection | Type 1 + 2 |
| Enclosure | Cold rolled steel with an epoxy paint finish to RAL7035 matt grey |
| Switchgear Fitted | Type 1+2 Surge Protection Device 250A |
| Material | Steel |
| Finish | Powder Coated RAL 9010 Matt |
| Backup Protection | 160A recommended. 250A maximum. |
| Compliance | Electromagnetic Compatibility Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Use | These devices are intended to reduce the peak value of voltage spikes. Mounted in an enclosure for fitting adjacent to an existing board. |
