6 Way 100A O-PEN Incomer TP&N MCB EV Distribution board
- 6 Triple Pole Outgoing Ways
- 100A 4 Pole Isolator Incomer
- Features a Matt:e O-PEN protection device which monitors the PEN conductor and trips the 5 pole MCB in the event of a fault, automatically reclosing once the fault is cleared.
- Accepts MCBs from 2A to 63A and RCBOS from 6A to 45A.
- Surge protection and Multi-function Metering optional if required.
- Insulated EV Earth bar and Neutral terminal bar
- Removable end plates, top and bottom
- Key hole wall fixings.
- Additional modular boxes available for RCDs.
Datasheet Download
- Additional information
Additional information
| Height | 1000 mm |
|---|---|
| Width | 500 mm |
| Depth | 170 + 50 mm |
| Weight | 32Kg |
| Short Circuit Rating | 10kA |
| Torque | 2.5Nm |
| Ambient Temperature | 35 Degrees Celsius |
| Mounting | Wall Mounted |
| Guarantee | 12 Months |
| Frequency | 50 Hz |
| Current Rating | 100A |
| Rated Operated Voltage | 230/400V ac. |
| Incoming Terminal Capacity | 50 mm2 |
| Terminal Type | Tunnel Terminal |
| Number of Outgoing Ways | 6 |
| Packaging Types | Each |
| Product Range | EV Distribution Boards |
| Standards | BS EN 61439 pt 1 & 3 |
| Protection Class IP Rating | IP3X |
| Surge Protection | Available On Request |
| Enclosure | 1.6mm Cold rolled steel with an epoxy paint finish to RAL7035 matt grey. Bolted construction. |
| Door Covers | Screw fixed covers. Side hinged door (removable) c/w metal turn catches. |
| Switchgear Fitted | 100A 4 Pole Isolator Incomer with O-PEN protection |
| Finish | Powder Coated RAL 7035 Matt |
| Compliance | Electromagnetic Compatibility Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Purpose | MCB distribution board fitted with PEN conductor failure protection. For EVC and similar installations where earth rods are not installed. |
| Pollution Degree | 3 |
