Three Phase and Neutral Type 1+2 Surge Protection Device 25kA Fitted In IP54 Plastic Enclosure
- Combined Type 1+2 Surge Protection Device (SPD) mounted in an IP54 insulated enclosure
- Plug in modules
- Key coded modules to prevent wrong insertion
- Reversible modules to allow top or bottom cabled terminals
- Visual status indication
- Suitable for TNC-s/TN-s or TT systems
- Impulse current Iimp ? 25kA 10/350 µs each phase
- Maximum discharge current Imax – 100kA 8/20 µs
- Nominal discharge current In – 25kA 8/20 µs
- Mains back up protection ? 315A
- Additional information
Additional information
| Height | 190 mm |
|---|---|
| Width | 250 mm |
| Depth | 120 mm |
| Weight | 1.54 Kg |
| Torque | 3 Nm |
| Ambient Temperature | -5 to +40 C |
| Mounting | Wall Mounted |
| Guarantee | 12 Months |
| Frequency | 50 Hz |
| Rated Operated Voltage | 230/400V ac. |
| Incoming Terminal Capacity | Tunnel Terminal 25mm Square Cable |
| Packaging Types | Each |
| Product Range | Surge Protection Devices |
| Standards | BS EN 61439 pt 1&2, BS EN 61643 pt 1 |
| Protection Class IP Rating | IP54 |
| Enclosure | ABS Plastic Enclosure |
| Switchgear Fitted | Type 2 Surge Protection Device 250A |
| Backup Protection | 160A recommended. 250A maximum. |
| Compliance | Electromagnetic Compatibility Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Restriction of the use of certain hazardous substances directive 2011/65/EU, Waste Electrical and Electronic Equipment directive 2012/19/EU |
| Intended Use | These devices are intended to reduce the peak value of voltage spikes |
